-40%
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm
Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm

Tapered DOD AFM delete plugs GM LS LT Gen 4 5 Interference Fit V IV 8.25mm

$ 10.08

Availability: 38 in stock
  • Performance Part: Yes
  • Items Included: Seal
  • Universal Fitment: Yes
  • Material: Steel
  • Brand: Federal-Mogul
  • Condition: New
  • Type: Camshaft

    Description

    For the EXTREME budget conscious. QUALITY Federal-Mogul tapered roller bearing set. Taper from 7.5mm-8.25mm to create an interference fit by hammer/punch/press into DOD AFM towers.
    WARNING: “Measure twice, cut once”. You will be hammering these plugs into your engine and risk creating debris or metal shavings, and once you start hammering there is no going back! You must drive them in enough to fall below the gasket height, and not contact the cover. NOT responsible for misuse or engine damage, measure oil hole first. Use at your own risk!
    For those who prefer a SAFER and more PROFESSIONAL approach, see my other post for equally inexpensive, high-pressure industrial blind sealing plugs that install with an (also) inexpensive heavy duty pop-rivet gun, which can be used for other applications later.
    Pictures are shown fit into my ACTUAL aluminum LH6 5.3 block.