-40%

SBF 289 302 Stage 2 Camshaft Lifters Timing Kit for Ford w/ 448/472 Lift MC1734

$ 107.96

Availability: 36 in stock
  • Brand: JAMSI
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • California Prop 65 Warning: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Lifter Type: Hydraulic Flat Tappet
  • Custom Bundle: Yes
  • Manufacturer Part Number: JAMMC1734CTAKL
  • Bundle Description: 1- MC1734 Camshaft, 16- HA900 Hydraulic Flat Tappets 1- 0830573 Adjustable Roller Timing Set, 1- CP302N Thrust Plate, 1- CE120I Inner Eccentric, 1- CE120O Outer Eccentric, 1- 40-1900 ZDDP Oil Additive
  • Fitment Type: Performance/Custom
  • Returns Accepted: Returns Accepted
  • Surface Finish: Maganese Phosphate Coated
  • Condition: New
  • Interchange Part Number: Melling MTF-1

    Description

    Engine Pro
    MC1734
    Hydraulic Flat Tappet Camshaft including:
    16- HA900 Hydraulic Flat Tappets
    1- 08-3057-3 adjustable roller timing set (+- 4 degrees)
    1 - CP302N Camshaft Thrust Plate
    1- CE120I Inner Fuel Pump Eccentric
    1- CE120O Outer Fuel Pump Eccentric
    1- 4OZ. ZDDP Zinc Oil Additive
    This kit fits FORD SBF 221, 255, 260, 289, 302 C.I. (EXCEPT 1982-85 302 H.O. & 302 C.I. W/HYD ROLLER LIFTERS) FIRING ORDER 1-5-4-2-6-3-7-8.
    Camshaft Specifications:
    Stage
    :     2
    Duration @ .050":
    Intake: 204 Exhaust: 214
    Advertised Duration:
    Intake:280 Exhaust: 289
    Valve Lift:
    Intake: .448 Exhaust: .472
    Lobe Separation:
    Intake: 108 Exhaust: 116
    Power Range:
    1500-4000
    Idle:
    Smooth
    Lifter Part #:
    900
    Comment:
    Torque Cam. Strong low end torque. Good for towing. Good mileage.
    NOTE:
    THE BASE CIRCLE SIZE OF THE CAMSHAFT MAY REQUIRE CONVERSION TO AN ADJUSTABLE VALVE TRAIN.
    General Stage 2 Camshaft Specifications:
    Idle Quality:
    SMOOTH
    Torque:
    GOOD LOW AND MID-RANGES 1800-2600 RPM
    Fuel Economy:
    GOOD
    Recommendations:
    Towing:
    GOOD FOR LIGHT PULLING AND RV USE
    Racing:
    NOT RECOMMENDED
    Computer Controlled Vehicles:
    MODIFICATIONS MAY BE NEEDED
    Transmission:
    STOCK AUTOMATIC OR MANUAL
    Compression Ratio:
    9.5:1 OR LESSER
    NOTE: Anytime you install a new camshaft, it should always have new lifters installed as cams and lifters create a wear pattern as they mate together.
    Camshafts and lifters are guaranteed to be straight, on size, and to correct lift, index and duration.  There is no guarantee on camshafts and lifters after engine is started.  Customer has the privilege of checking and inspecting camshafts and lifters at the time of installation.  If camshafts and lifters do not meet your level of satisfaction, DO NOT INSTALL!  Returns only accepted if camshafts and lifters has not been installed.  No guarantee once engine has been run.