-40%
Brian Tooley Racing (BTR) 7.400

Brian Tooley Racing (BTR) 7.400" 5/16" DIA. PUSHRODS (SET 16) - LS1/LS2/LS3/LS6

$ 54.9

Availability: 326 in stock
  • Brand: Brian Tooley Racing
  • Returns Accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Condition: New
  • Refund will be given as: Money back or exchange (buyer's choice)
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number).  Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.
  • Manufacturer Part Number: Does Not Apply

    Description

    Untitled Document
    View Store
    Feedback
    Brian Tooley Racing (BTR) 7.400" 5/16" DIA. PUSHRODS (SET 16) - LS1/LS2/LS3/LS6
    Listing is for 7.400" Chromoly One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16).
    LS1/LS2/LS6/L92/LS3/L99/1999-2013 GM Truck (Silverado/Sierra) 4.8L, 5.3L, 6.0L, 6.2L Engines
    Other lengths are available from 7.200" to 7.900", please contact us if you need a different size than listed.
    These one piece precision formed pushrods are constructed from SAE 4130 chromoly tubing, centerless ground to exacting tolerances, and case hardened to RC60.
    7.400" is the standard LS length, but any of the following can affect pushrod length required and each application may be different.
    Cylinder Head Deck Thickness
    Block Deck Height
    Valve Stem Length
    Rocker Arm Brand
    Cam Shaft Base Circle Diameter
    Lifter Design, Etc.
    We highly recommend that you measure you particular application to determine correct pushrod length due to the number of variables involved.
    We cannot recommend a length based strictly on combination and the only way to determine required length is to measure appropriately.
    RETURNS
    Please read the listing entirely as r
    eturns are typically not accepted and may be subject to a 20% restocking fee
    . If you have any questions or are unsure of something, please ask before purchasing. Cancellations will not be made for purchasing errors.
    It is the buyer's responsibility to make sure that they enter the correct shipping information at the time of purchase. Once an item has shipped, we can not make edits to the shipment, including the shipping address provided.
    SHIPPING
    Most items ship in 1-2 business days. Shipping is available for customers outside of the Contiguous United States, please contact us for the best and most accurate rate quote.
    PAYMENTS
    LEGAL
    All images and text contained within this listing are protected by intellectual property copyright law and are intended for the sole use of Glenn's Auto Performance.
    O
    ur
    Terms of Service Agreement
    and
    Privacy Policy
    are available for your review by clicking the hyperlink.